Symptom: Error code [0013-00-000] occurs while an ECU upgrade is in progress.
Cause: This error code occurs when ECU upgrade AUTO MODE identifies the Target, but communication fails during the ROM ID check.
Resolution:
1. If there is no previous ECU upgrade history, connect the diagnostic device and verify that the sensor Output for the Target controller is displayed correctly.
2. If a previous ECU upgrade failed, recover the ECU by performing the ECU upgrade in Manual Mode.
[Additional Resources]
What to Do When ECU Upgrade Fails
How to Send an Error Log Report on KDS 2.0/KDS2.0
How to Retrieve ECU Logs from Your Tablet on KDS 2.0/KDS2.0
If the workaround above does not resolve the issue, contact your distributor or GIT support at the following email address for further assistance.
Comments
0 comments
Please sign in to leave a comment.