Oscar Eom

CauseNo response or delayed response from ECU during memory erase or consistency check command ActionsCheck if the diagnostic tool (diagnostic app) is updated to the latest versionCheck for any aft...

1. 5000–5019: File/Certificate Transfer and Basic Communication ErrorsError codes in this range indicate issues related to Rule/Bin file transfer, SHA certificate transfer, and basic communication ...

CauseNegative response from the ECU (controller) side to the data transmission command executed by the ECU APP (GITN_ECU). ActionsCheck the vehicle battery status.If error code 7000-36-7F92 continu...

SymptomWhen attempting to perform the Smart Key registration function, the registration fails with the message “Registration failed” along with “Smartkey security has not been released.”Image: Regi...

Type ■ Notice □ Update □ Service Guide □ Campaign □ Other Diagnostic Tool ■ KDS 2.0 ■ KDS 2.0 Registration Date 2025.11.26 Ref. No. Subject Korea Domestic Smart Warranty Service Restor...

This article provides troubleshooting steps for Ethernet-required ECU Upgrade failures using KDS 2.0 diagnostic devices. It covers causes such as incorrect tablet IP configuration, outdated softwar...

The main cause of the “7000-31-7F72” error occurring at 95~99% during an ECU upgrade is failure to meet routine execution conditions due to aftermarket devices and similar factors. Checking IG ON s...

The Actuation Test screen has been intuitively redesigned to display only descriptions and operating conditions in the basic list, with functional explanations and video support added in the detail...

1. SymptomsKDS 2.0 / KDS 2.0 After the internet update is completed, clicking the Install button launches Smart Launcher and prompts for a license key. After the license key is entered, an authent...