Kia KDS 2.0 Installation via USB

<How to Install KDS 2.0 via USB>

This guide explains how to install KDS 2.0 using a USB flash drive.

Follow the steps below to install KDS 2.0.

1. Connect the USB flash drive to the tablet.

Make sure the tablet recognizes the USB flash drive.

2. Open My Files on the tablet, and then open the USB storage.

3. Tap SmartLauncher.apk.

Make sure the tablet is connected to Wi-Fi.

4. Tap the Install button.

5. Grant the required permissions to the Smart Launcher app.

6. Run Smart Launcher, and then enter the license key provided to you.

Tap the 'OK' button.

7. Enter the GSW ID, password, and tablet Serial Number.

8. Tap the 'Recovery via USB' button.

9. Select the USB path as shown below.

If an SD card is inserted, more than one storage device may be displayed.

Select the connected USB flash drive.

Note: Steps 8 and 9 are required only for tablets running Android OS 11 or later.

10. Select the 'nvci' folder, and then tap 'Use this folder' at the bottom of the screen.

11. The installation will begin.

The installation may take some time to complete.

12. After the installation is complete, log in using your GSW account.

For instructions on using the application, refer to the KDS 2.0 user manual in Smart Launcher.

END.