Symptom: Error code [1000-C8-0001] occurs during an ECU upgrade.
Cause: Socket connection failure with the gateway (non-CCU type) required to perform the Ethernet event.
Resolution:
1. Check whether any aftermarket equipment is installed in the vehicle.
2. Verify that the ECI cable is connected correctly and that the tablet has a fixed IP address.
3. Connect the diagnostic tool and verify that the gateway controller sensor output is displayed correctly.
4. Disconnect the vehicle power connector, wait 5 minutes, reconnect it, and then retry the ECU upgrade.
Comments
0 comments
Please sign in to leave a comment.