This article explains how to configure an Ethernet connection by checking the hardware connections, selecting Ethernet in the tablet PC settings, configuring the device to use a static IP address, and saving the entered IP address.
PLEASE NOTE
To perform an ECU upgrade or diagnosis that requires Ethernet, configure the diagnostic tool as follows:
- When using VCI2, connect an ECI (Ethernet Communication Module) and its cable between the VCI2 and the tablet PC. Appendix: How to set up the ECI, VCI2, and tablet PC
- When using VCI3, connect the designated cable (P/N: G1XDDCA020) between the VCI3 and the tablet PC.
1. Configure the Ethernet settings
✅ If the Ethernet button is disabled, check the VCI and cable connections
In the operating system settings, select Settings > Connections > More connection settings > Ethernet.
2. Configure the Ethernet device
In the Ethernet device configuration, select Fixed IP Settings.
3. Enter and save the static IP address
Enter the static IP address using the values displayed on the screen, and then save the settings.
Appendix: How to set up the ECI, VCI2, and tablet PC
Comments
0 comments
Please sign in to leave a comment.