(※ Depending on your mobile device settings, you may experience issues when downloading or opening user manual files. If a user manual file does not open, install another web browser, such as Samsung Internet, and download the file again, or download and view it from the PC website ( https://support-kia.gitauto.com/).
Please refer to the link below for video guides.
Please select the desired function.
--------------------------------------------------------------------------------------------------------------------
Basic Operation Module Connection Smart Search Digital Field Fix Smart Diagnosis
Expert Diagnosis DTC Search Sensor Data Diagnosis Multi-System Sensor Data Diagnosis Actuation Test Special Functions
System Identification Recorded Data Analysis ECU Upgrade OBD-II Flight Record Utility
--------------------------------------------------------------------------------------------------------------------
: Describes the basic operation of KDS 2.0.
: Describes how to connect (pair) the VCI II, GDS VCI, and TPMS modules.
: Smart Search allows you to view information about the selected vehicle, including basic information and repair history, as well as technical information organized by symptom, case, and other categories.
: Provides shortcuts to useful utilities.
: Provides comprehensive diagnostic results for the systems of the selected vehicle.
: Describes the basic operation of Expert Diagnosis.
: Searches for DTCs in one or more systems installed in the vehicle and provides detailed information and service information related to the detected DTCs.
: Provides comprehensive diagnostic results for the systems of the selected vehicle.
: Displays, via vehicle communication, the sensor input signals and parameter values used by the vehicle's control modules to control actuator operation.
Multi-System Sensor Data Diagnosis
: Similar to Sensor Data Diagnosis, this function allows sensor data from multiple control modules installed in the vehicle to be analyzed simultaneously on a single screen.
*This function is available only for modules that support the CAN communication protocol.
: Commands the control module to activate or stop various actuators installed in the vehicle, allowing you to verify whether each component operates correctly.
: Provides additional setup, test, initialization, and other functions required after vehicle repairs.
: Displays identification information for the control modules installed in the vehicle, including Part No, H/W, and S/W information.
: Allows you to view data saved on the tablet PC and copy driving data stored in the VCI II.
: Updates vehicle control modules to correct issues or improve performance when required by the vehicle manufacturer. This function may be performed only by service providers authorized by the manufacturer.
: Displays powertrain emissions-related diagnostic data in accordance with OBD-II standards.
: Records data output while the vehicle is being driven.
: Provides functions for checking the operating status of control modules or vehicle components before vehicle repair.
: Provides various utilities for user convenience.
: Uses the wireless borescope module to inspect the interior of mechanical components that are difficult to view directly.
*This is an optional accessory and must be purchased separately.
: Uses the VMI measurement module to diagnose the vehicle by measuring actual sensor and actuator waveforms and using simulation functions.
*This is an optional accessory and must be purchased separately.
Comments
0 comments
Please sign in to leave a comment.