Kia KDS 2.0 Installation via USB

<How to Install KDS 2.0 via USB>

This guide explains how to install KDS 2.0 using a USB flash drive.

Follow the steps below to install KDS 2.0.

1.  Connect the USB flash drive to the tablet. 

Make sure the tablet recognizes the USB flash drive.

2.  Open My Files on the tablet, and then select USB storage.

3. Select SmartLauncher.apk.

Make sure the tablet PC is connected to Wi-Fi.

4. Select the Install button. 

5. Grant the required permissions to access the Smart Launcher app.

6. Run Smart Launcher, and then enter the provided license key. 

Select the 'OK' button.

7. Enter your GSW ID, password, and tablet Serial Number. 

8. Select the 'Recovery via USB' button.

9. Select the USB path as shown in the image below.

If an SD card is inserted, more than one storage device may be displayed.

Select the connected USB flash drive.

Note: Steps 8 and 9 are required only for Android OS 11 or later.

10. Select the 'nvci' folder, and then select Use this folder at the bottom. 

11. The installation will begin.

The installation may take some time to complete.

12. After the installation is complete, log in using your GSW account.

For questions regarding operation, refer to the Smart Launcher/KDS 2.0 user manual.

END.